SOC: 53-4012 OOH: U317
Railroad Workers Quick Stats |
|
Total Jobs in 2016 | 105,500 |
Expected Growth | -3% (Decline) |
New Jobs To Be Added from 2016 to 2026 |
-3,000 |
Median Pay | $55,000 to $74,999 |
Overall employment of railroad workers is projected to decline 3 percent from 2016 to 2026. Decreasing demand for the transportation of bulk commodities, such as coal and oil, may cause some railroads to reduce employment in an effort to become more efficient.
As more pipelines open up in the oil and natural gas-producing areas, the need for rail transportation in these areas may decline. In addition, more power plants are increasingly using natural gas instead of coal for electricity production, which should contribute to reduced demand for coal.
However, an increase in intermodal freight—the shipment of goods through multiple transportation modes—may increase demand for some railroad workers.
Employment of locomotive firers is projected to decline 79 percent from 2016 to 2026. Most railroads are phasing out this occupation, as their duties are typically performed by locomotive engineers and conductors.
Job opportunities should be competitive for railroad workers. Job openings will primarily stem from the need to replace retiring workers.
The median annual wage for railroad workers was $57,160 in May 2016. The median wage is the wage at which half the workers in an occupation earned more than that amount and half earned less. The lowest 10 percent earned less than $39,060, and the highest 10 percent earned more than $80,880.
Median annual wages for railroad workers in May 2016 were as follows:
Locomotive firers | $58,230 |
Locomotive engineers | 57,670 |
Railroad conductors and yardmasters | 57,480 |
Railroad brake, signal, and switch operators | 56,570 |
Rail yard engineers, dinkey operators, and hostlers | 50,470 |
In May 2016, the median annual wages for railroad workers in the top industries in which they worked were as follows:
Government | $59,570 |
Rail transportation | 57,650 |
Scenic and sightseeing transportation and support activities for transportation | 40,050 |
Trains are scheduled to operate 24 hours a day, 7 days a week, meaning that many railroad workers sometimes work nights, weekends, and holidays. Most rail employees work full time. Federal regulations require a minimum number of rest hours for train operators.
Locomotive engineers and conductors whose trains travel long routes can be away from home for long periods of time. Those who work on passenger trains with short routes generally have a more predictable schedule. Workers on some freight trains have irregular schedules.
For engineers and conductors, seniority (the number of years on the job) usually dictates who receives the most desired shifts. Some engineers and conductors, called extra board, are hired on a temporary basis and get an assignment only when a railroad needs an extra or substitute worker on a certain route.
Most railroad workers belonged to a union in 2016.
Workers in railroad occupations ensure that passenger and freight trains run on time and travel safely. Some workers drive trains, some coordinate the activities of the trains, and others operate signals and switches in the rail yard.
Railroad workers typically do the following:
Freight trains move billions of tons of goods around the country to ports where they are shipped around the world. Passenger trains transport millions of passengers and commuters to destinations around the country. These railroad workers are essential to keeping freight and passenger trains running properly.
All workers in railroad occupations work together closely. Locomotive engineers travel with conductors and sometimes brake operators. Locomotive engineers and conductors are in constant contact and keep each other informed of any changes in the condition of the train.
Signal and switch operators communicate with both locomotive and rail yard engineers to make sure that trains end up at the correct destination. All occupations are in contact with dispatchers who give them directions on where to go and what to do.
The following are examples of types of railroad workers:
Locomotive engineers drive freight or passenger trains between stations. They drive long-distance trains and commuter trains, but not subway trains. Most locomotive engineers drive diesel-electric engines, although some drive locomotives powered by battery or electricity.
Engineers must be aware of the goods their train is carrying because different types of freight require different types of driving, based on the conditions of the rails. For example, a train carrying hazardous material through a snowstorm is driven differently than a train carrying coal through a mountain region.
Locomotive engineers typically do the following:
Conductors travel on both freight and passenger trains. They coordinate activities of the train crew. On passenger trains, they ensure safety and comfort and make announcements to keep passengers informed. On freight trains they are responsible for overseeing the loading and unloading of cargo.
Conductors typically do the following:
Yardmasters do work similar to that of conductors, except that they do not travel on trains. They oversee and coordinate the activities of workers in the rail yard. They tell yard engineers where to move cars to fit the planned configuration or to load freight. Yardmasters ensure that trains are carrying the correct material before leaving the yard. Not all rail yards use yardmasters. In rail yards that do not have yardmasters, a conductor performs the duties of a yardmaster.
Yardmasters typically do the following:
Rail yard engineers operate train engines within the rail yard. They move locomotives between tracks to keep the trains organized and on schedule. Some operate small locomotives called dinkeys. Sometimes, rail yard engineers are called hostlers and drive locomotives to and from maintenance shops or prepare them for the locomotive engineer. Some use remote locomotive technology to move freight cars within the rail yards.
Railroad brake, signal, or switch operators control equipment that keeps the trains running safely.
Brake operators help couple and uncouple train cars. Some travel with the train as part of the crew.
Signal operators install and maintain the signals along tracks and in the rail yard. Signals are important in preventing accidents because they allow increased communication between trains and dispatchers.
Switch operators control the track switches in rail yards. These switches allow trains to move between tracks and ensure trains are heading in the right direction.
Locomotive firers are sometimes part of a train crew and typically monitor tracks and train instruments. They look for equipment that is dragging, obstacles on the tracks, and other potential safety problems.
Few trains still use firers, because their work has been automated or is now done by a locomotive engineer or conductor.
Railroad workers held about 105,500 jobs in 2016. Employment in the detailed occupations that make up railroad workers was distributed as follows:
Railroad conductors and yardmasters | 41,800 |
Locomotive engineers | 38,800 |
Railroad brake, signal, and switch operators | 19,300 |
Rail yard engineers, dinkey operators, and hostlers | 4,400 |
Locomotive firers | 1,200 |
The largest employers of railroad workers were as follows:
Rail transportation | 90% |
Scenic and sightseeing transportation and support activities for transportation | 5 |
Government | 4 |
Rail yard engineers and brake, signal, and switch operators spend most of their time working outside, regardless of weather conditions.
Conductors on passenger trains generally work in cleaner, more comfortable conditions than conductors on freight trains. However, conductors on passenger trains sometimes must respond to upset or unruly passengers when a train is delayed.
Because trains are scheduled to operate 24 hours a day, 7 days a week, many railroad workers sometimes work nights, weekends, and holidays. Most rail employees work full time. Federal regulations require a minimum number of rest hours for train operators.
Locomotive engineers and conductors whose trains travel long routes can be away from home for long periods of time. Those who work on passenger trains with short routes generally have more predictable schedules. Workers on some freight trains have irregular schedules.
For engineers and conductors, seniority (the number of years on the job) usually dictates who receives the most desired shifts. Some engineers and conductors, called extra board, are hired on a temporary basis and get an assignment only when a railroad needs an extra or substitute worker on a certain route.
Workers in railroad occupations generally need a high school diploma or equivalent and several months of on-the-job training.
Rail companies typically require a high school diploma or equivalent, especially for locomotive engineers and conductors.
Locomotive engineers generally receive 2 to 3 months of on-the-job training before they can operate a train on their own. Typically, this training involves riding with an experienced engineer who teaches them the characteristics of that particular train route.
During training, an engineer learns the track length, where the switches are, and any unusual features of the track. An experienced engineer who switches to a new route also has to spend a few months in training to learn the route with an engineer who is familiar with it. In addition, railroad companies provide continuing education so that engineers can maintain their skills.
Most railroad companies have 1 to 3 months of on-the-job training for conductors and yardmasters. Amtrak (the passenger train company) and some of the larger freight railroad companies operate their own training programs. Smaller and regional railroads may send conductors to a central training facility or a community college.
Yardmasters may be sent to training programs or may be trained by an experienced yardmaster. They learn how to operate remote locomotive technology and how to manage railcars in the yard.
Conductors and yardmasters working for freight railroads also learn the proper procedures for loading and unloading different types of cargo. Conductors on passenger trains learn ticketing procedures and how to handle passengers.
Rail yard engineers and signal and switch operators also receive on-the-job training, generally through a company training program. This program may last a few weeks to a few months, depending on the company and the complexity of the job. The program may include some time in a classroom and some hands-on experience under the direction of an experienced employee.
Most locomotive engineers first work as conductors for several years.
Locomotive engineers must be certified by the Federal Railroad Administration (FRA). The certification, conducted by the railroad that employs them, involves a written knowledge test, a skills test, and a supervisor determining that the engineer understands all physical aspects of the particular route on which he or she will be operating.
An experienced engineer who changes routes must be recertified for the new route. Even engineers who do not switch routes must be recertified every few years.
At the end of the certification process, the engineer must pass a vision and hearing test.
Conductors who operate on national, regional, or commuter railroads are also required to become certified. To receive certification, new conductors must pass a test that has been designed and administered by the railroad and approved by the FRA.
Rail yard engineers, switch operators, and signal operators can advance to become conductors or yardmasters. Some conductors or yardmasters advance to become locomotive engineers.
Communication skills. All rail employees have to be able to communicate effectively with other crewmembers and passengers to keep the trains on schedule.
Customer-service skills. Conductors on passenger trains ensure customers’ comfort, make announcements, and answer any travel questions a passenger has. They must be courteous and patient. They may have to deal with unruly or upset passengers.
Decisionmaking skills. When operating a locomotive, engineers must plan ahead and make decisions minutes or even hours in advance.
Hand-eye coordination. Locomotive engineers have to operate various controls while staying aware of their surroundings.
Hearing ability. To show that they can hear warning signals and communicate with other employees, locomotive engineers have to pass a hearing test conducted by their rail company.
Leadership skills. On some trains, a conductor directs a crew. In rail yards, yardmasters oversee other workers.
Mechanical skills. All rail employees work with complex machines. Most have to be able to adjust equipment when it does not work properly. Some rail yard engineers spend most of their time fixing broken equipment or conducting daily mechanical inspections.
Physical strength. Some rail yard engineers have to lift heavy equipment.
Visual ability. To drive a train, locomotive engineers have to pass a vision test conducted by their rail company. Eyesight, peripheral vision, and color vision may be tested.
In addition, locomotive operators must be at least 21 years of age and pass a background test. They must also pass random drug and alcohol screenings over the course of their employment.
"Railroad Workers" SOC: 53-4012 OOH Code: U317